The T07 housing series is an extremely powerful camera housing concept suitable for hazardous and explosion risk areas and is certified according to European regulations (ATEX) as well as international ones (IECEx).
Explosion Proof Camera Housings
During the housing’s development stage the focus was clearly laid on security aspects as well as mechanical precision and high-quality stainless steels. In addition, the modular conception of the housing system allows a free combination of the individual housing components such as different flanges in combination with the housing body – without any limitations regarding explosion protection.
Regarding the technical parameters we have pushed the limits of what is feasible so that the T07-Series defines new standards – may it be with regard to media resistance, temperature range, impact resistance or the application possibilities. Due to the compact dimensions of the housing body, available in two different sizes, and the plain and timeless design, we have achieved to develop a housing series which is, despite its extreme ruggedness, optically elegant as well as hapitically soothing.
After almost one year of development, laboratory testing and TÜV certifications we are proud to have one of the world’s most robust and flexible camera housing combinations in our portfolio.
Use own camera in blast proof housing bodies
The heart of the modular design is the two housing bodies which differ in diameter. The more narrow VA1.x housing body can be equipped, on both sides, with flanges disposing of a 6-fold blind hole ring. The wider VA2.x housing body can hold two flanges with up to 8 blind holes. Instead of executing the flange connections disposing of threads, we have decided for an execution with cylinder thread flanges. This implementation and the associated fitting tolerances allow a very simple assembly of the individual housing components.
In addition, the different flanges can be varied freely. It is, for example, possible to use different glass types for the optical flanges or to furnish the flanges for the cable glands with different hole patterns and configurations. Within the limits of the maximum length, it is also possible to freely determine the length of the housing body. Even the larger VA2.2 housing does not exceed a void volume of two liters so that for explosion group IIB the screw joints can be sealed with regular rubber rings. Since the potential explosion energy decreases in relation to the housing volume, it is possible to shorten both housing bodies in order to exactly meet your requirements. And no matter how you configure the housing – it is always extremely robust and safe!